Pinon Gear slipped out of the motor

[trdcelica02]

I am running 8000 Mamba and the pinon slipped off the motor and grind the sliper gear....i tighten the pinion so tight and it slipped off when i was running it ...how can i fix this problem...

[letian]

i had to grind it flat, then didn't slip out again :D

[J.E.]

i had to grind it flat, then didn't slip out again :D

yes !! that is the only way to do it !! ;)

[BitHed]

...yup...make a flat spot...btw you can use loctite or super glue too...either will melt / soften with a hot iron if you need to get them off...